Choosing exterior paint colors for a Tri-Cities home
How sun, heat, your roof and masonry, sample testing, and HOA rules should shape the colors you pick for a house in this valley.
Picking exterior paint colors is the fun part of a repaint, and also the part people worry about most. A color that looked right on a store chip can look washed out on a west wall in July, or clash with the roof you are keeping. In Kennewick, Richland, Pasco, and West Richland, the strong sun and dry heat add one more question: how will this color hold up after a few summers?
Late fall and winter are a good time to work through it. Most exterior painting here waits for milder weather (our guide to the best time to paint exteriors in the Tri-Cities explains why), so you have time to test colors, talk it over, and get any approvals you need before spring.
Start with how much sun your walls get
NOAA’s 1991–2020 climate normals for the Kennewick station (USC00454154) put the normal July high at about 91°F, with about 48 days a year at 90°F or hotter and under 8 inches of precipitation in a normal year.
Sherwin-Williams describes fading as color lightening on surfaces with sunny exposures, and notes that it is easy to spot because protected areas such as eaves usually do not fade. On most Tri-Cities houses that means the south and west sides change first. Compare a sunny wall with a spot under the eaves to see how hard your exposure is on color. (If you are seeing chalking, cracking, or peeling as well as fading, our checklist of signs your house needs exterior paint covers what each one means.)
Which colors hold up best in strong sun
Not every color fades at the same rate. A Sherwin-Williams article on selecting long-lasting colors explains that inorganic pigments, made from metal oxides, resist sun and weather well and usually show up as earth tones such as beige, tan, and brick red. Bright, intense colors such as fire red and blaze orange depend on organic pigments, which hold up less well. The same article notes that in desert climates with high sun and heat, inorganic pigments are the most common choice because they resist fading.
What that means for a house in this valley:
- Earth tones and soft neutrals (tans, warm grays, greiges, muted greens, and browns) are a practical choice for large wall areas that face south or west.
- Bright, saturated colors can still work, but they are better used where you can see them up close and touch them up easily, such as a front door, rather than across a full sunny wall.
- Product matters as much as color. Sherwin-Williams lists using more tint than recommended, or interior-grade colorants outdoors, as causes of fading. Its exterior FAQ notes that 100% acrylic house paint offers better fade resistance than lower-grade blends, and Benjamin Moore points to UV resistance as one of the main differences between higher- and lower-quality exterior paints.
On exteriors we specify Sherwin-Williams SuperPaint or Emerald acrylic latex, chosen for protection and color retention in this sun.
Light vs. dark colors in the heat
Every paint color has a light reflectance value, or LRV. Sherwin-Williams prints it on the back of its color chips. The scale runs from 0 (absorbs all light) to 100 (reflects all light). The lower the number, the darker the color and the more sunlight it soaks up as heat. Sherwin-Williams’ color article sums it up as a rule of thumb: the lighter the color, the better its solar reflectance.
Dark exteriors can look great, but a low-LRV wall absorbs more of the summer sun. Before you commit to a charcoal, deep green, or near-black body color:
- Vinyl siding needs special care. Sherwin-Williams warns that vinyl expands and contracts with temperature, and that painting it darker than its original color can make it warp or buckle. Its rule of thumb is to stay no darker than the original color unless the coating is made for it, such as the Sherwin-Williams VinylSafe color palette.
- Deep colors are harder to touch up. Sherwin-Williams notes that deep shades such as hunter green and burgundy are heavily pigmented and often do not touch up invisibly, even with the same paint.
A common way to get the look without the heat is to keep the main body in a light or mid-tone color and use the deeper color on the front door, shutters, or trim.
Coordinate with what you are not painting
Your roof, brick, stone, windows, and gutters stay the same after the painters leave, so they should steer the palette. Benjamin Moore recommends building a scheme from unchanging elements like roofing, stone, brick, and landscaping, and notes that most homeowners use three to four colors: body, trim, and one or two accents. A Sherwin-Williams article gives a simple example: a terra cotta tile roof looks best with warm or neutral paint colors.
A practical way to do it:
- List the fixed colors from the street: roof, brick or stone veneer, window frames, and anything else you are keeping.
- Decide whether they lean warm or cool. Brown, tan, red, and gold lean warm; gray, charcoal, and blue-black lean cool. Choose a body color with a similar undertone.
- Don’t try to match the masonry exactly. Pick a color that relates to one of the tones in the stone or brick but is clearly lighter or darker, so both look intentional.
- Use trim for contrast. Trim, fascia, and the front door can add crispness or a pop of color without risking a whole wall.
If you are also deciding on sheen, our guide to choosing paint sheen explains why exteriors are about protection first.
Test samples on several walls and at several times of day
Chips are a starting point, not the final answer. Sherwin-Williams recommends ordering paint samples and checking how the colors look at different times of day. Benjamin Moore adds an important detail for exteriors: its liquid paint samples are made for color testing indoors only, so for exteriors it recommends brushing two coats on white foam board instead of painting directly on the siding.
How to get a useful test:
- Make big samples. A board around two feet square shows much more than a chip.
- Move them around the house. Look at the boards on a sunny south or west wall, a shaded north wall, and next to the roofline and any stone or brick. Benjamin Moore notes that a color in shade looks darker than the same color in direct sun, and that the direction your house faces changes how the color appears.
- Check morning, midday, and late afternoon. Sherwin-Williams explains that sunlight near sunrise and sunset shifts toward the red end of the spectrum, so colors can look different at those times than at midday.
- Look from the street, not just up close, before you decide.
Check your HOA before you pick a final color
Many Tri-Cities subdivisions have an HOA, and many HOAs require architectural or design-committee approval before you change exterior colors. Sherwin-Williams notes that some communities enforce rules restricting exterior house colors. Before you fall in love with a color:
- Read your CC&Rs and design guidelines, or ask your HOA or management company whether a color change needs approval and whether there is an approved color list.
- Ask what to submit. Requests often ask for color names and numbers and where each color goes (body, trim, accents). Rules vary, so ask whether repainting in the same color is treated differently from a color change.
- Get approval in writing before painting starts, and build the review time into your spring schedule.
A quick color-choosing checklist
- Note which walls get the most afternoon sun, and list your fixed colors.
- Favor earth tones and light-to-mid neutrals for big sunny walls; save bold colors for accents.
- Check the LRV on the chip, and the vinyl rules if you have vinyl siding.
- Test sample boards on several sides of the house, morning to late afternoon, and get any HOA approval in writing.
How we help
At the estimate visit we walk the house, look at the siding and trim, and note what needs scraping and priming. We provide a color wheel to help you choose, and we typically email an itemized estimate within one to two business days of the visit. We paint T1-11, wood, fiber cement, stucco, and brick. Before every exterior paint job, we pressure-wash so the new coat has a clean surface to bond to. No job is too small, from a one-wall touch-up to a full repaint.
If you are in Kennewick, Richland, Pasco, West Richland, Benton City, Finley, Burbank, or Prosser, call or text (509) 212-3755, or request a free estimate for exterior painting.
Sources
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, Kennewick, WA (USC00454154): annual precipitation and days at or above 90°F; monthly normal high temperatures.
- Sherwin-Williams, Fading; Six Tips for Selecting Colors That Last; Worthy of Reflection (LRV); Exterior Product Selection FAQs; Vinyl Siding Warping; How to Think About Exterior Paint Color; Exterior House Colors.
- Benjamin Moore, Exterior House Colors You’ll Love; Tips on How to Sample Paint Colors; How to Paint Your Home Exterior.
More guides
Signs your house needs new exterior paint: a Tri-Cities checklist
What chalking, fading, cracking, peeling, open caulk, and mildew mean on a house in this sun and dry heat, and when it is time to repaint.
Read the guide →Best time of year to paint exteriors in the Tri-Cities
How the Columbia Basin’s hot, dry climate and strong sun affect scheduling and prep for exterior paint.
Read the guide →Choosing paint sheen for walls, ceilings, and trim
Why we usually recommend flat or matte on ceilings and eggshell on walls, and how sheen affects washability and look.
Read the guide →Areas we serve
Kennewick Richland Pasco West Richland Benton City Finley Burbank Prosser
